The roof is the place where many top floor buyers are most worried about water leakage because the roof is in direct contact with the outside world.During rain occurs on the roof, causing many roofs to leak.How should the roof be waterproof be done?How to choose the waterproof materials?Xiaobian want to take the following problem as an example to analyze this problem.

Which waterproof material is good for roof leakage?In fact, we need to analyze from two different situations: one is the choice of waterproof materials in the roof waterproof construction; the other is the choice of waterproof materials when the roof is water leakage.Therefore, the family complex divides this question into two questions and gives everyone one answer one by one.

Which kind of waterproof material is suitable for roof waterproof construction?

The roof is usually large in area and relatively wide in space.In addition, our roof is in direct contact with the outdoor environment and is affected by the outdoor environment.Therefore, when choosing waterproof materials, it is necessary to consider the roof spatial characteristics, environmental impact, and roof use to make a choice.

First, the spatial characteristics.The roof is at the top of our building, usually a relatively open place.Therefore, we can consider this feature when choosing a waterproof material.According to this feature, our commonly used waterproof materials are polymer-modified asphalt waterproof roll material, polypropylene cloth, and polyurethane waterproof coatings.These materials are very easy to construction in these spacious spaces.

Second, environmental characteristics.The so-called environmental features mean that the roof is suitable for contact with the outdoor environment.This will result in the waterproof materials used on the roof being affected by the outdoor environment.For example, it is most often affected by direct sunlight, but also by freezing and thawing in the winter cold and summer.Therefore, we must also consider this feature when choosing a waterproof material.In view of this feature, I personally recommend the choice of polymer modified asphalt waterproof roll material, polyurethane waterproof coating, or polymer cement mortar waterproof coating.

Third, the roof is use.The purpose of the roof refers to our roof is the main roof or the main roof.Because the roof is different, the impact on later personnel is different.Therefore, we should also consider these characteristics when choosing waterproof materials.For example, people are not allowed to walk.However, polymer modified asphalt waterproof rolls can move on it to some extent.

Selection suggestions: through the above three aspects of the selection of roof waterproof materials introduction, personal suggestions that the first choice of polymer modified asphalt waterproof coil as the roof waterproof material.As for other materials, few material is currently used for the roof.

Which waterproof material is good for a leaky roof?

When the roof leaks, it is usually done by repairing the holes.The so-called leak is to find the leakage point, and then plug the leakage point, to take a temporary remedy to deal with the roof leakage.Therefore, we need to consider the convenience of the construction and the reliability of the materials.

First, the construction is convenient.In fact, we mainly consider which material is more convenient when blocking the roof.Since the blockage cannot be completely eliminated within a large area, reasonable materials should be used.The personally recommended material here is the roof waterproof plugging cream or asphalt paste.

Second, the reliability of the materials.That is, after we blocked the leak position with some waterproof and plugging material, we cannot let this material leak again soon due to the environment.The most common is the stratification between blocking material and cracks, causing water to leak along these cracks.

Selection suggestions: for the material selection of water leakage and roof water leakage repair, the personal recommended method is to use the current commonly used roof plugging cream.Brush with polyurethane or polymer cement mortar is not recommended when blocking.