Product introduction
This product is a pure flavor type green environmental protection functional coating, the coating is full and easy to construction, with excellent insulation, mildew resistance, anti-condensation and decorative effect.

Product advantage
1, clean taste technology is more environmentally friendly, can be adjusted color, easy construction
2, high covering power and adhesion, not easy to fall off, cracking
3, effectively inhibit condensation, to achieve antibacterial, anti-mildew and anti-mite effect
4, heat insulation, help to reduce energy consumption

Scope of application
Suitable for home, school, hospital, factory, entertainment and other indoor wall decoration and underground space inner wall anti-mold and anti-condensation treatment and decoration

Reference dosage
≥ 1.2kg /m²

Save:
1, storage conditions: cool and dry place, sealed storage, stored in a ventilated and dry place above 5 ° C, should avoid direct sunlight to prevent freezing in winter.
2, shelf life: under the premise of good storage, the original sealing condition shelf life is 12 months.
3, transport: according to non-flammable liquid transport.
4, abandonment provisions: unused waste and solidified waste is recommended to be treated by qualified treatment agencies or in accordance with local laws and regulations, do not pour into water or soil.

Reference standard
T/CECS 10342-2023

Construction technology
1, with water as the dispersion medium, the construction environment temperature is generally not less than 5℃;
2, the construction method is sprayed, painted more than 2 times to achieve the corresponding thickness;
3, the construction should be carried out after the previous coating is completely dry, and the construction should be carried out step by step until the required film thickness;
4, before use, the beaded resin is easy to float on the top, should be fully stirred (you can use an electric mixer) after uniform use.

Construction method
1, grassroots inspection. Check whether the base surface is leaking water, if there is a good waterproof before construction;
2. Basic treatment. Remove the protruding objects on the base surface, thoroughly clean up dust and debris, and keep the base surface dry and clean;
3, paint multi-construction. When spraying construction, use a spray machine that can be applied to high viscosity, if you need to achieve better performance, you can increase the number of spraying times and improve the coating thickness.
4, inspection, repair, acceptance. Check the coating surface, trim the weak parts and the coating hanging parts.

Matters needing attention
1, please ensure that the base surface is dry;
2. When the temperature is below 5℃, the humidity is above 85%, or there is condensation, please do not construct;
3, the work place should be well ventilated, the operation of the work is strictly prohibited fireworks;
4, the product is stored in a cool place, properly kept, stored and discarded, so as to avoid contact with infants, after opening, please use up as soon as possible.