Jiagubao
Classification:
Engineering renovation
Hotline:
Jiagubao
Jiagubao is a variety of high-strong gel materials and additives combined by special process composite of powder with hydrophobic effect fast waterproof blocking material, with obvious hydrophobic effect.After mixing Jiagubao with water at 1:0.4, quickly apply to the leakage site, which can quickly block the leak without dampness phenomenon.
1. Non-toxic and environmentally friendly;
2. It sets and hardens quickly with high strength. The setting time can be adjusted by adding water according to the specific situation.
3. Adding infiltration crystallization masterbatch, it has strong anti-seepage ability and is not damp;
4. It has obvious hydrophobic effect.
GB 23440-2009 "Inorganic waterproof and leak-proof materials"
|
Test items |
standard regulation |
Test results |
|
|
Coagulation time/min |
Initial setting time |
≤5 |
≤3 |
|
Final setting time |
≤10 |
≤5 |
|
|
Compressive strength/MPa |
1h |
≥4.5 |
25.4 |
|
3d |
≥15.0 |
36.2 |
|
|
Flexural strength/MPa |
1h |
≥1.5 |
5.6 |
|
3d |
≥4.0 |
6.9 |
|
|
Test piece impermeability pressure/MPa (7d) |
≥1.5 |
4.0 |
|
|
Bond strength/MPa (7d) |
≥0.6 |
1.13 |
|
|
Heat resistance (100℃, 5h) |
No cracking, peeling or shedding |
No cracking, peeling or shedding |
|
|
Freeze-thaw cycles (20 times) |
No cracking, peeling or shedding |
No cracking, peeling or shedding |
|
Filling of gaps in bathrooms, kitchens, roofs, basements, walls, pools, swimming pools, etc.; repair of defects around various wall-penetrating pipes and casings, and repair of pipeline grooves; leveling and reinforcement of kitchen and bathroom floors; strengthening of nodes such as pipe roots and internal corners.
1. Before construction, the area to be treated must be cleaned and fully moistened, but no open water is allowed;
2. During construction, first pour the weighed water into a clean mixing bucket, then pour the Jiagubao evenly and stir quickly. The powder of this product has a hydrophobic effect and coagulates quickly, so it is not advisable to stir too much at one time. It is recommended to stir quickly in batches and use it quickly after mixing evenly;
3. When plugging leaks, repairing pipe roots and internal corners, it is recommended to quickly stir the powder and water at a ratio of 1:0.4 before use;
4. For seepage pits, you can directly put the dry powder of the product into the pit, compact and smooth it, and then sprinkle water for maintenance.
1. The unopened product has a shelf life of one year. If it forms lumps due to moisture, it cannot be used again.
2. Remember not to add too much water or use it at low temperature, which will prolong the solidification time;
3. If the construction temperature is lower than 10°C, warm water can be used for mixing;
4. Do not stir too much material at one time, and do not add water after initial coagulation;
5. Different construction temperature and humidity will cause certain fluctuations in the powder-water ratio;
Store in a cool and dry place, tightly sealed, and use as soon as possible after opening.
In a cool and dry place, the unopened product has a shelf life of 12 months.
Product Message