Product introduction
This product is modulated by new functional materials, resin emulsions and additives, which can form a special functional coating to control water vapor condensation, reduce the temperature difference between the air and the surface of the object from the root, block the thermal bridge, prevent the emergence of condensation critical point, and scientifically control the condensation and condensation phenomenon.

Product advantage
1, inhibit condensation, excellent condensation resistance
2, low density, strong adhesion, excellent high and low temperature resistance
3, moisture-proof and mildew resistant, durable performance
4, zero VOC, green environmental protection

Executive standard
T/CECS 10342-2023

Scope of application
Used in houses, buildings, factories and other internal and external walls and basements, special protection buildings, warehouses, indoor sports venues, cold storage, containers, etc., to prevent condensation.

Reference dosage
≥1 kg/m²

Save:
1, storage conditions: cool and dry place, sealed storage, stored in a ventilated and dry place above 5 ° C, should avoid direct sunlight to prevent freezing in winter.
2, shelf life: under the premise of good storage, the original sealing condition shelf life is 12 months.
3, transport: according to non-flammable liquid transport.
4, abandonment provisions: unused waste and solidified waste is recommended to be treated by qualified treatment agencies or in accordance with local laws and regulations, do not pour into water or soil.

Construction technology
1, with water as the dispersion medium, the construction environment temperature is generally not less than 5℃;
2, the use of spraying construction method to ensure that the coating achieves the corresponding effect thickness;
3, it is recommended that the standard thickness of the film is ≥1mm, the standard film thickness can play the role of anti-condensation, but if you want to obtain a greater effect, please consider increasing the film thickness according to the actual situation;
4, according to the need to achieve insulation and anti-condensation effect to select the appropriate thickness, after the construction should be completed after the previous coating dry, construction until the required film thickness;
5, before use, the beaded resin is easy to float on the top, so please stir thoroughly (you can use an electric mixer).

Construction method
1, grassroots inspection. Check whether the base surface is leaking water, if there is a good waterproof before construction;
2. Basic treatment. Remove the protruding objects on the base surface, thoroughly clean up dust and debris, and keep the base surface dry and clean;
3, paint multi-construction. The construction method of spraying is adopted, and the air pressure spraying machine suitable for high-viscosity coating is selected. The spraying times are more than 2 times, and the coating thickness can be improved if the better effect is needed.
4, inspection, repair, acceptance. Check the coating surface, trim the weak parts and the coating hanging parts.

Matters needing attention
1, please ensure that the base surface is dry;
2. When the temperature is below 5℃, the humidity is above 85%, or there is condensation, please do not construct;
3, the work place should be well ventilated, the operation of the work is strictly prohibited fireworks;
4, the product is stored in a cool place, properly kept, stored and discarded, so as to avoid contact with infants, after opening, please use up as soon as possible.